Home Electrical & LightingElectricalResistorsAluminum Case Resistors
Harfington Uxcell 25 Watt 10 Ohm 5% Aluminum Housing Resistor Wirewound Resistor 18mm Mounting Hole 2 Pcs

Uxcell 25 Watt 10 Ohm 5% Aluminum Housing Resistor Wirewound Resistor 18mm Mounting Hole 2 Pcs

ID:
€8,72 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    10%OFF
  • Order $800+
    15%OFF
  • Order $2000+
    25%OFF
  • Order $5000+
    35%OFF
Wholesale Price
About this item
  • 25 Watt and 10 Ohm, 5% tolerance. Size: 28mm x 27mm x 14mm, total lenght with connector: 50mm.
  • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built. Wire Wound Resistor owns high reliability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Chassis mounted with Screws, Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
  • Reliable. Problems like the flush LED and ring doorbell would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
  • In stock, ready to ship
Cart
Cart
About this item
  • 25 Watt and 10 Ohm, 5% tolerance. Size: 28mm x 27mm x 14mm, total lenght with connector: 50mm.
  • Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
  • This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built. Wire Wound Resistor owns high reliability and accuracy. Moreover, it was used for various application because of the wide resistance range.
  • Chassis mounted with Screws, Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
  • Reliable. Problems like the flush LED and ring doorbell would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:

25 Watt 10 Ohm Aluminum Case Wirewound Resistor with 5% Tolerance

Power: 25W

Resistance: 10 ohm

Tolerance: 5%

Connection Type: Rods

Board Length: 28mm

Mounting Hole Diameter: 3.5mm

Distance Between Mounting Hole: 18mm

Materials: Nickel alloys Wire Wound Resistor with Aluminum Case

Color: Gold

Package Content: 2 pcs 25W 10ohm Aluminum Resistor

Suggestion:

a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

  • If you choose a 30% increase in rated power, you must add a heat sink device.
  • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

25 Watt 10 Ohm Aluminum Case Wirewound Resistor with 5% Tolerance

Power: 25W

Resistance: 10 ohm

Tolerance: 5%

Connection Type: Rods

Board Length: 28mm

Mounting Hole Diameter: 3.5mm

Distance Between Mounting Hole: 18mm

Materials: Nickel alloys Wire Wound Resistor with Aluminum Case

Color: Gold

Package Content: 2 pcs 25W 10ohm Aluminum Resistor

Suggestion:

a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.

b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.

c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

  • If you choose a 30% increase in rated power, you must add a heat sink device.
  • If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .