Home FabricatingMachiningHole SawsGlass Hole Saws
Harfington Uxcell 115mm Dia Diamond Particles Coating Tip Hole Saw Drill Bit for Glass

Uxcell 115mm Dia Diamond Particles Coating Tip Hole Saw Drill Bit for Glass

ID:
$15.06 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About this item
  • SIZE - 115mm(4.5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling Glass, Tile, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Marble, etc.
  • In stock, ready to ship
Cart
Cart
About this item
  • SIZE - 115mm(4.5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling Glass, Tile, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Marble, etc.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:
Description:Cutting tip with AAA Grade diamond particles coated offers sharp cutting, the efficiency of cutting will be improved greatly.
Nickel plated. make it more durable than the general hole saw,segmented design works better and lasts longer.
Specifically for glass openings.excellent results in tile.
Cut holes smoothly, tidily, with out broken edges and vibration phenomenon.
Small incision resistance, increase the speed of cutting holes, easy to decorate after grooving and easy to clean.
Attentions:This glass hole saw needs to be used at a low speed, about 800-1000r per minute.
In order to prolong the life of this glass hole saw, when processing, please add into coolant liquids or water.
Working without cooling is forbidden.
Please start your hole diagonally, make a round trace and then hold drill straight.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Description:Cutting tip with AAA Grade diamond particles coated offers sharp cutting, the efficiency of cutting will be improved greatly.
Nickel plated. make it more durable than the general hole saw,segmented design works better and lasts longer.
Specifically for glass openings.excellent results in tile.
Cut holes smoothly, tidily, with out broken edges and vibration phenomenon.
Small incision resistance, increase the speed of cutting holes, easy to decorate after grooving and easy to clean.
Attentions:This glass hole saw needs to be used at a low speed, about 800-1000r per minute.
In order to prolong the life of this glass hole saw, when processing, please add into coolant liquids or water.
Working without cooling is forbidden.
Please start your hole diagonally, make a round trace and then hold drill straight.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .