Home FabricatingMachiningHole SawsGlass Hole Saws
Harfington Uxcell Diamond Coated Glass Hole Saw Drills Bits for Ceramic Tile

Uxcell Diamond Coated Glass Hole Saw Drills Bits for Ceramic Tile

ID:
$8.00 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
17mm
Size
About this item
  • SIZE - 17mm(0.67-inch) Drilling Diameter, 7mm(0.28-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
  • In stock, ready to ship
Cart
Cart
About this item
  • SIZE - 17mm(0.67-inch) Drilling Diameter, 7mm(0.28-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
  • SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:

Specifications:

Cutting Diameter: 17mm / 0.67-inch

Shank Diameter: 7mm / 0.28-inch

Total Length: 50mm / 2-inch

Suggested Operate Speed: 800-1000RPM

Material: Metal, Diamond Particles

Coating: Nickel Plated

 

Package Contents:

5 x Glass Hole Saws

 

Descriptions:

1.AAA Grade diamond particles coated cutting tip offers sharp and efficient cutting.

2.Nickel plated surface makes it more durable. Segmented design works better and lasts longer.

3.Specifically for glass openings. Excellent results in tile.

4.Cut holes smoothly, tidily, without broken edges and vibration phenomenon.

5.Small incision resistance, increase the speed of cutting holes, easy to decorate and clean after grooving.

 

Attentions:

1.This glass hole saw needs to be used at a low speed, about 800-1000RPM.

2.In order to prolong the life of this glass hole saw, please add coolant liquids or water when processing. Do not working without cooling.

3.Please start your hole diagonally, make a round trace and then hold drill straight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Specifications:

Cutting Diameter: 17mm / 0.67-inch

Shank Diameter: 7mm / 0.28-inch

Total Length: 50mm / 2-inch

Suggested Operate Speed: 800-1000RPM

Material: Metal, Diamond Particles

Coating: Nickel Plated

 

Package Contents:

5 x Glass Hole Saws

 

Descriptions:

1.AAA Grade diamond particles coated cutting tip offers sharp and efficient cutting.

2.Nickel plated surface makes it more durable. Segmented design works better and lasts longer.

3.Specifically for glass openings. Excellent results in tile.

4.Cut holes smoothly, tidily, without broken edges and vibration phenomenon.

5.Small incision resistance, increase the speed of cutting holes, easy to decorate and clean after grooving.

 

Attentions:

1.This glass hole saw needs to be used at a low speed, about 800-1000RPM.

2.In order to prolong the life of this glass hole saw, please add coolant liquids or water when processing. Do not working without cooling.

3.Please start your hole diagonally, make a round trace and then hold drill straight.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .