Home Automobiles & MotorcyclesReplacement PartsFuel Injectors & PartsFuel Injectors
Harfington 4 Stück Einspritzdüse 0280158105 7L5G9F593AB Ersatz für Ford

4 Stück Einspritzdüse 0280158105 7L5G9F593AB Ersatz für Ford

ID:
€38,31 Normaler Preis
/
About This Item
  • The Replacement Part Number(OE Number): 0280158105, 7L5G9F593AB, 7L5Z9F593AA, CM-5128, 822-11192, 297-2009, FJ1004.
  • Fitment: for Ford Escape 2.3L 2007-2008, for Ford Focus 2.0L 2007, for Ford Fusion 2.3L 2006-2009, for Mercury Milan 2.3L 2006-2009, for Ford for Ranger 2.3L 2006-2011.
  • Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
  • Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
  • Package Included: 4 Pcs Fuel Injector; Material: Metal, Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc Flow Rate: Flow Rate at 43.5psi/3 bar, 24.78Lb/hr, 186.6G/min, 259.5cc/min.
  • Auf Lager
Einkaufswagen
Cart
About This Item
  • The Replacement Part Number(OE Number): 0280158105, 7L5G9F593AB, 7L5Z9F593AA, CM-5128, 822-11192, 297-2009, FJ1004.
  • Fitment: for Ford Escape 2.3L 2007-2008, for Ford Focus 2.0L 2007, for Ford Fusion 2.3L 2006-2009, for Mercury Milan 2.3L 2006-2009, for Ford for Ranger 2.3L 2006-2011.
  • Fuel-Efficient Injector: High efficient fuel sprays and High Impedance Coil enable fast start up in the cold environments, low fuel consumption, and better performance.
  • Professional installation is highly recommended: Fuel injectors directly affect the air/fuel ratio for the engine and new fuel injectors do require a new or updated tune. We also suggest that you check the other component of the engine before installation.
  • Package Included: 4 Pcs Fuel Injector; Material: Metal, Plastic; Pin Number: 2; Voltage: DC 12V; Orifice Type: 4 Holes Disc Flow Rate: Flow Rate at 43.5psi/3 bar, 24.78Lb/hr, 186.6G/min, 259.5cc/min.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven’t received the reply by then, please check your spam. Thank you!
Product Description:
Beschreibung:

Hergestellt aus Metall und Kunststoff Material, das langlebig ist und für eine lange Zeit verwenden kann.
Der hochohmige Kraftstoffinjektor wurde getestet und passt exakt dem internen Spulenwiderstand und der Kraftstoffdurchflussrate des OEM-Kraftstoffinjektors an.
Dies ist ein Nicht-OEM-Produkt, nur Zubehör!

Spezifikation:
O-Ringe Inbegriffen: Ja, vorinstalliert
Öffnungsart: 4 Löcher Disc
Spannung: DC 12V
Material: Metall, Kunststoff
OE Nummer: 028015815, 7L5G9F593AB, 7L5Z9F593AA, CM-5128, 822-11192, 297-2009, FJ1004
Pin Nummer: 2
Dimension: 79x32x18mm.3.11"x1.26"x0.71"(L*W*H)
Durchflussrate: Durchflussrate bei 43,5psi/3 bar, 24,78Lb/h, 186,6G/min, 259.5cc/min

Fitment:
für Ford Escape 2.3L 2007-2008
für Ford Focus 2.0L 2007
für Ford Fusion 2.3L 2006-2009
für Mercury Milan 2.3L 2006-2009
für Ford für Ranger 2.3L 2006-2009

Package Included:
Pcs Fuel Injection or 2011

Schritt-Installation Stellen Sie sicher, dass der Motor abgekühlt ist. Trennen Sie den Akku.
Schritt 2. Entfernen Sie die Schrauben und Halterungen von der Kraftstoffschiene.
Schritt 3. Trennen Sie den Stecker an jedem Injektor.
Schritt 4. Heben Sie die Kraftstoffschiene an und entfernen Sie den Einspritzdüse von der Kraftstoffschiene.
Schritt 5. Drücken Sie den neuen Injektor in die Schiene. Setzen Sie die Kraftstoffschiene wieder an und stecken Sie die Einspritzdüsen in ihre jeweiligen Löcher.
Schritt 6. Treibstoffschiene abschrauben. Treibstoffleitung wieder anschließen. Stecken Sie Injektorstecker ein. Akku wieder anschließen.
Schritt 7. Überprüfen Sie vor und nach dem Starten des Motors nochmals auf Kraftstofflecks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products title ID Price Qty
Products title ID Price Qty
{[item.title]} {[item.id]} {['$' + item.price]}
Qty: {[total.qty]} Item(s)
Total Price: ${[total.price]}
View More

Description

Description

Beschreibung:

Hergestellt aus Metall und Kunststoff Material, das langlebig ist und für eine lange Zeit verwenden kann.
Der hochohmige Kraftstoffinjektor wurde getestet und passt exakt dem internen Spulenwiderstand und der Kraftstoffdurchflussrate des OEM-Kraftstoffinjektors an.
Dies ist ein Nicht-OEM-Produkt, nur Zubehör!

Spezifikation:
O-Ringe Inbegriffen: Ja, vorinstalliert
Öffnungsart: 4 Löcher Disc
Spannung: DC 12V
Material: Metall, Kunststoff
OE Nummer: 028015815, 7L5G9F593AB, 7L5Z9F593AA, CM-5128, 822-11192, 297-2009, FJ1004
Pin Nummer: 2
Dimension: 79x32x18mm.3.11"x1.26"x0.71"(L*W*H)
Durchflussrate: Durchflussrate bei 43,5psi/3 bar, 24,78Lb/h, 186,6G/min, 259.5cc/min

Fitment:
für Ford Escape 2.3L 2007-2008
für Ford Focus 2.0L 2007
für Ford Fusion 2.3L 2006-2009
für Mercury Milan 2.3L 2006-2009
für Ford für Ranger 2.3L 2006-2009

Package Included:
Pcs Fuel Injection or 2011

Schritt-Installation Stellen Sie sicher, dass der Motor abgekühlt ist. Trennen Sie den Akku.
Schritt 2. Entfernen Sie die Schrauben und Halterungen von der Kraftstoffschiene.
Schritt 3. Trennen Sie den Stecker an jedem Injektor.
Schritt 4. Heben Sie die Kraftstoffschiene an und entfernen Sie den Einspritzdüse von der Kraftstoffschiene.
Schritt 5. Drücken Sie den neuen Injektor in die Schiene. Setzen Sie die Kraftstoffschiene wieder an und stecken Sie die Einspritzdüsen in ihre jeweiligen Löcher.
Schritt 6. Treibstoffschiene abschrauben. Treibstoffleitung wieder anschließen. Stecken Sie Injektorstecker ein. Akku wieder anschließen.
Schritt 7. Überprüfen Sie vor und nach dem Starten des Motors nochmals auf Kraftstofflecks.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the {[currentShipping.abbr]} over {[currentShipping.price]}
Estimated shipping time will be within {[currentShipping.days]} days
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .