Home DIYRC AccessoriesMotor AccessoriesCarbon Brush Holder Caps
Harfington Carbon Brush Holder Cap Motor Electric Brush Plastic Cover Thread Black 20mm OD 8mm Height, Pack of 10

Carbon Brush Holder Cap Motor Electric Brush Plastic Cover Thread Black 20mm OD 8mm Height, Pack of 10

ID:
€6,25 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About this item
  • Round black carbon brush cap, used as a cover for installing carbon brushes in power tools, is suitable for most motors. Suitable for hammer, electric saw, electric grinder, trimming machine, etc.
  • Pack of 10 Carbon Brush Caps; Outer Diameter: 20mm/0.79inch ; Height: 8mm/0.31inch; Material: Plastic.
  • The cap is made of black durable plastic for the carbon brush holder. It is a good substitute for the old carbon brush cap. It has good heat and wear resistance, good corrosion resistance, good sealing performance, waterproof and dustproof, smooth surface and accurate thread, which can match the machine accurately.
  • After removing the carbon brush holder, remove the caps, replace the brush caps you received. Measure the old cap with a vernier caliper, if the measured cap diameter is about 11.5mm, it is recommended to order a 12mm carbon brush cap.
  • Tips: When installing the carbon brush and the cap, make sure that the square back cap of the brush holder is pressed against the power contact piece and then fastened. The outer diameter of the cover must match the hole diameter of the position where the carbon brush is installed. Please pay attention to the size before ordering.
  • In stock, ready to ship
Cart
Cart
About this item
  • Round black carbon brush cap, used as a cover for installing carbon brushes in power tools, is suitable for most motors. Suitable for hammer, electric saw, electric grinder, trimming machine, etc.
  • Pack of 10 Carbon Brush Caps; Outer Diameter: 20mm/0.79inch ; Height: 8mm/0.31inch; Material: Plastic.
  • The cap is made of black durable plastic for the carbon brush holder. It is a good substitute for the old carbon brush cap. It has good heat and wear resistance, good corrosion resistance, good sealing performance, waterproof and dustproof, smooth surface and accurate thread, which can match the machine accurately.
  • After removing the carbon brush holder, remove the caps, replace the brush caps you received. Measure the old cap with a vernier caliper, if the measured cap diameter is about 11.5mm, it is recommended to order a 12mm carbon brush cap.
  • Tips: When installing the carbon brush and the cap, make sure that the square back cap of the brush holder is pressed against the power contact piece and then fastened. The outer diameter of the cover must match the hole diameter of the position where the carbon brush is installed. Please pay attention to the size before ordering.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:
What is this?
Round black carbon brush cap, used as a cover for installing carbon brushes in power tools, is suitable for most motors. Suitable for hammer, electric saw, electric grinder, trimming machine, etc.

What will I get?
Pack of 10 Carbon Brush Caps; Outer Diameter: 20mm/0.79inch ; Height: 8mm/0.31inch; Material: Plastic.

Are there any advantages of the product?
The cap is made of black durable plastic for the carbon brush holder with long service life.  It is a good substitute for the old carbon brush cap.

How to use it?
After removing the carbon brush holder, remove the caps, replace the brush caps you received.

What should  I notice?
Tips: When installing the carbon brush and the cap, make sure that the square back cap of the brush holder is pressed against the power contact piece and then fastened. The outer diameter of the cover must match the hole diameter of the position where the carbon brush is installed. Please pay attention to the size before ordering.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

What is this?
Round black carbon brush cap, used as a cover for installing carbon brushes in power tools, is suitable for most motors. Suitable for hammer, electric saw, electric grinder, trimming machine, etc.

What will I get?
Pack of 10 Carbon Brush Caps; Outer Diameter: 20mm/0.79inch ; Height: 8mm/0.31inch; Material: Plastic.

Are there any advantages of the product?
The cap is made of black durable plastic for the carbon brush holder with long service life.  It is a good substitute for the old carbon brush cap.

How to use it?
After removing the carbon brush holder, remove the caps, replace the brush caps you received.

What should  I notice?
Tips: When installing the carbon brush and the cap, make sure that the square back cap of the brush holder is pressed against the power contact piece and then fastened. The outer diameter of the cover must match the hole diameter of the position where the carbon brush is installed. Please pay attention to the size before ordering.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .