Home Fastening & JoiningFastenersScrews & BoltsFlat Head ScrewsPhillips Flat Head Screws
Harfington Uxcell M10 x 20mm Plastic Phillips Machine Screws with Nuts and Flat Washers, PC Flat Head Machine Bolts Transparent 20 Sets

Uxcell M10 x 20mm Plastic Phillips Machine Screws with Nuts and Flat Washers, PC Flat Head Machine Bolts Transparent 20 Sets

ID:
€11,51 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About this item
  • Specification: Thread Size: M10 x 20mm; Pitch: 1.5mm / 0.06"; Package Content: 20 Sets x Phillips Machine Screws with Nuts, Flat Washers
  • Material: Screws, nuts and washers are made of polycarbonate material, which is sturdy, transparent and engineering thermoplastic.
  • Features: Lightweight, high toughness, high impact resistance, anti-static, non-conducting, good insulation, chemical resistance, hydrolysis resistance, corrosion resistance, no rust, heat-resistant and long service life.
  • Advantage: The countersunk style makes it very suitable for use in tight areas where the screw head needs to be flush or below the surface.
  • Application: Widely used in the electronics industry, wind power industry, aerospace industry, office equipment industry, communication industry, shipbuilding industry, exhibition industry, DIY handicraft, etc.
  • In stock, ready to ship
Cart
Cart
About this item
  • Specification: Thread Size: M10 x 20mm; Pitch: 1.5mm / 0.06"; Package Content: 20 Sets x Phillips Machine Screws with Nuts, Flat Washers
  • Material: Screws, nuts and washers are made of polycarbonate material, which is sturdy, transparent and engineering thermoplastic.
  • Features: Lightweight, high toughness, high impact resistance, anti-static, non-conducting, good insulation, chemical resistance, hydrolysis resistance, corrosion resistance, no rust, heat-resistant and long service life.
  • Advantage: The countersunk style makes it very suitable for use in tight areas where the screw head needs to be flush or below the surface.
  • Application: Widely used in the electronics industry, wind power industry, aerospace industry, office equipment industry, communication industry, shipbuilding industry, exhibition industry, DIY handicraft, etc.
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:
Screws, nuts and washers are made of polycarbonate material, which is sturdy, transparent and engineering thermoplastic. It has the characteristics of lightweight, high toughness, high impact resistance, anti-static, non-conducting, good insulation, chemical resistance, hydrolysis resistance, corrosion resistance, no rust, heat-resistant and long service life.
The countersunk style makes it very suitable for use in tight areas where the screw head needs to be flush or below the surface.
These screws are widely used in the electronics industry, wind power industry, aerospace industry, office equipment industry, communication industry, shipbuilding industry, exhibition industry, DIY handicraft, etc.

Specification:
Material: PC(Polycarbonate)
Screw Drive Type: Phillips
Screw Head Style: Flat Head
Thread Size: M10 x 20mm
Pitch: 1.5mm / 0.06"
Screw Head Diameter: 17.5mm / 0.69"
Hex Nut Width: 16mm / 0.63"
Flat Washer Size: 20 x 10.5 x 2mm / 0.79" x 0.41" x  0.08"(OD*ID*T)
Package Content: 20 Sets x Phillips Machine Screws with Nuts, Flat Washers
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

Screws, nuts and washers are made of polycarbonate material, which is sturdy, transparent and engineering thermoplastic. It has the characteristics of lightweight, high toughness, high impact resistance, anti-static, non-conducting, good insulation, chemical resistance, hydrolysis resistance, corrosion resistance, no rust, heat-resistant and long service life.
The countersunk style makes it very suitable for use in tight areas where the screw head needs to be flush or below the surface.
These screws are widely used in the electronics industry, wind power industry, aerospace industry, office equipment industry, communication industry, shipbuilding industry, exhibition industry, DIY handicraft, etc.

Specification:
Material: PC(Polycarbonate)
Screw Drive Type: Phillips
Screw Head Style: Flat Head
Thread Size: M10 x 20mm
Pitch: 1.5mm / 0.06"
Screw Head Diameter: 17.5mm / 0.69"
Hex Nut Width: 16mm / 0.63"
Flat Washer Size: 20 x 10.5 x 2mm / 0.79" x 0.41" x  0.08"(OD*ID*T)
Package Content: 20 Sets x Phillips Machine Screws with Nuts, Flat Washers
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'AT').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .