Home DIYRC AccessoriesDC MotorsReducing Motors
Harfington Micro Speed Reduction Gear Motor, DC 12V 400RPM with Full Metal Gearbox

Micro Speed Reduction Gear Motor, DC 12V 400RPM with Full Metal Gearbox

ID:
$7.81 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About this item
  • Widely used for DIY subjects, lifts, landing gear, mechanical arms, RC aircraft, model cars, model robots, electronic devices, electric doors, electric screwdrivers, etc.
  • Voltage: 12V; Speed: 400RPM; Output Shaft Diameter:3mm/0.12inch; Output Shaft Length: 9mm / 0.35 inch;Motor Length: 15mm/0.59inch; Total size: 36 x 12 x 10mm/1.4 x 0.47 x 0.39inch(LxWxH);Motor model: N20; Shaft type:D type; Pack of 1pcs Motor
  • Made of copper and steel. It has good wear resistance, high-temperature resistance, and vibration resistance, good reliability, fine craftsmanship, and durable
  • With good stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
  • Please try to avoid block or overload of the reduction motor, otherwise, the gear will collapse and wear. The forward and reverse control is not suitable for the gear to switch the direction immediately when it is rotating. The direction can be switched only after it is completely stopped
  • In stock, ready to ship
Cart
Cart
About this item
  • Widely used for DIY subjects, lifts, landing gear, mechanical arms, RC aircraft, model cars, model robots, electronic devices, electric doors, electric screwdrivers, etc.
  • Voltage: 12V; Speed: 400RPM; Output Shaft Diameter:3mm/0.12inch; Output Shaft Length: 9mm / 0.35 inch;Motor Length: 15mm/0.59inch; Total size: 36 x 12 x 10mm/1.4 x 0.47 x 0.39inch(LxWxH);Motor model: N20; Shaft type:D type; Pack of 1pcs Motor
  • Made of copper and steel. It has good wear resistance, high-temperature resistance, and vibration resistance, good reliability, fine craftsmanship, and durable
  • With good stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
  • Please try to avoid block or overload of the reduction motor, otherwise, the gear will collapse and wear. The forward and reverse control is not suitable for the gear to switch the direction immediately when it is rotating. The direction can be switched only after it is completely stopped
Specification

Specification

Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:
What is this?

Widely used for DIY subjects, lifts, landing gear, mechanical arms, RC aircraft, model cars, model robots, electronic devices, electric doors, electric screwdrivers, etc.



What will I get?

Voltage: 12V; Speed: 400RPM; Output Shaft Diameter:3mm/0.12inch; Output Shaft Length: 9mm / 0.35 inch;Motor Length: 15mm/0.59inch; Total size: 36 x 12 x 10mm/1.4 x 0.47 x 0.39inch(LxWxH);Motor model: N20; Shaft type:D type; Pack of 1pcs Motor


Is there any advantages of the product?

Made of copper and steel. It has good wear resistance, high-temperature resistance, and vibration resistance, good reliability, fine craftsmanship, and durable



How to use it?

With good stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.



What should  I notice?

Please try to avoid block or overload of the reduction motor, otherwise, the gear will collapse and wear. The forward and reverse control is not suitable for the gear to switch the direction immediately when it is rotating. The direction can be switched only after it is completely stopped
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
{[item.title]} {[item.id]} {[handleCurrency(item.price*100)]}
Qty: {[total.qty]} Item(s)
Total Price: {[handleCurrency(total.price*100)]}
View more

Description

Description

What is this?

Widely used for DIY subjects, lifts, landing gear, mechanical arms, RC aircraft, model cars, model robots, electronic devices, electric doors, electric screwdrivers, etc.



What will I get?

Voltage: 12V; Speed: 400RPM; Output Shaft Diameter:3mm/0.12inch; Output Shaft Length: 9mm / 0.35 inch;Motor Length: 15mm/0.59inch; Total size: 36 x 12 x 10mm/1.4 x 0.47 x 0.39inch(LxWxH);Motor model: N20; Shaft type:D type; Pack of 1pcs Motor


Is there any advantages of the product?

Made of copper and steel. It has good wear resistance, high-temperature resistance, and vibration resistance, good reliability, fine craftsmanship, and durable



How to use it?

With good stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.



What should  I notice?

Please try to avoid block or overload of the reduction motor, otherwise, the gear will collapse and wear. The forward and reverse control is not suitable for the gear to switch the direction immediately when it is rotating. The direction can be switched only after it is completely stopped
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
{['Free Shipping to the US over $20'.replace('US', currentShipping.abbr || 'US').replace('$20', currentShipping.price || '$20')]}
{['Estimated shipping time will be within 6-14 days'.replace('6-14', currentShipping.days || '6-15')]}
Shipping Method

Ship to

Total Delivery Time = Processing Time + Shipping Time

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .