Home DIYRC AccessoriesMotor AccessoriesCarbon Brushes
Harfington Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack

Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack

ID:1341978
ID:1341978
$5.40 Regular price
/
  • Order $200+
    5%OFF
  • Order $500+
    7%OFF
  • Order $800+
    10%OFF
  • Order $2000+
    15%OFF
  • Order $5000+
    20%OFF
Wholesale Price
About this item
  • The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
  • Package Content: 4pcs Motor Carbon Brushes; Total Length: 32mm/ 1.26 inch; Carbon Brush Size(LxWxH): 14x7.5x6.5mm/ 0.55x0.3x3.58 inch
  • The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
  • The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
  • Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
  • Ship from the US
  • In stock, dispatch in 24 hours.
Cart
Cart
About this item
  • The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
  • Package Content: 4pcs Motor Carbon Brushes; Total Length: 32mm/ 1.26 inch; Carbon Brush Size(LxWxH): 14x7.5x6.5mm/ 0.55x0.3x3.58 inch
  • The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
  • The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
  • Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
Inquiry submitted successfully
We will reply within 24 hours during work time. If you haven't received the reply by then, please check your spam. Thank you!
Product Description:
What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.

What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 32mm/ 1.26 inch; Carbon Brush Size(LxWxH): 14x7.5x6.5mm/ 0.55x0.3x3.58 inch

Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.

How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.

What should  I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.

Product Variants

Products Title ID Price Qty
Products Title ID Price Qty
Uxcell Carbon Brushes for Electric Motors 12mm x 8mm x 5mm Replacement Repair Part Set of 10 1003378 $6.59
Uxcell Carbon Brushes for Electric Motors 13mm x 6mm x 4mm Replacement Repair Part Set of 10 1113179 $6.94
Uxcell Carbon Brushes for Electric Motors 16mm x 12.5mm x 6.5mm Replacement Repair Part 4Pcs 1113180 $6.08
Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 20 Pack 1341984 $6.57
Carbon Brushes 0.67x0.43x4.69 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341990 $5.60
Carbon Brushes 0.51x0.35x3.07 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1341999 $6.18
Carbon Brushes 0.67x0.43x3.35 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1342002 $6.38
Uxcell Carbon Brushes for Electric Motors 13mm x 7.5mm x 6.5mm Replacement Repair Part Set of 10 1097594 $6.94
Uxcell Carbon Brushes for Electric Motors 11mm x 5mm x 5mm Replacement Repair Part Set of 10 1093708 $6.92
Carbon Brushes 0.4x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 20 Pack 1341966 $6.92
Carbon Brushes 0.55x0.31x2.48 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1341969 $5.40
Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341970 $5.40
Carbon Brushes 0.47x0.31x2.36 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341977 $5.40
Carbon Brushes 0.51x0.24x2.05 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1341980 $5.40
Carbon Brushes 0.53x0.31x2.66 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341982 $5.40
Carbon Brushes 0.51x0.31x3.07 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341993 $5.40
Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1342000 $5.99
Uxcell Carbon Brushes for Electric Motors 11mm x 5mm x 5mm Replacement Repair Part 4pcs 1097592 $5.77
Carbon Brushes 0.63x0.5x4.09 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1341962 $6.38
Carbon Brushes 0.4x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 8 Pack 1341965 $6.06
Carbon Brushes 0.51x0.24x2.05 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341968 $5.40
Carbon Brushes 0.63x0.5x4.09 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341971 $5.40
Carbon Brushes 0.47x0.31x2.36 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1341975 $5.40
Carbon Brushes 0.67x0.43x3.35 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341981 $5.40
Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack 1341983 $5.60
Carbon Brushes 0.71x0.67x4.96 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack 1341985 $5.60
Carbon Brushes 0.6x0.4x3.54 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack 1341989 $6.38
Uxcell Carbon Brushes for Electric Motors 16mm x 13mm x 6mm Replacement Repair Part Set of 2 1097593 $5.46
Uxcell Carbon Brushes for Electric Motors 12mm x 8.5mm x 5.5mm Replacement Repair Part Set of 2 1000160 $5.38
Uxcell Carbon Brushes for Electric Motors 14mm x 9mm x 6mm Replacement Repair Part 10pcs 1089481 $7.28
Qty: 0 Item(s)
Total Price: $0.00
View more

Description

Description

What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.

What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 32mm/ 1.26 inch; Carbon Brush Size(LxWxH): 14x7.5x6.5mm/ 0.55x0.3x3.58 inch

Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.

How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.

What should  I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show less
Free Shipping to the US over $20
Estimated shipping time will be within 6-14 days
  • Standard Shipping:

    US$3.99 for order under US$20.00

    Free shipping on order over US$20

    Estimated shipping time will be within 6-14 days

  • UPS Air Express:

    US$32.99 for order under US$200.00

    Free shipping on order over US$200.00

    Estimated shipping time will be within 4-8 days

Free upgraded to UPS over $200

30 Day Free Return
Wholesale Inquiry
* Product Name
* Quantity(Each)
* Email Address
Customer Name
Expected Arrival Time
Customer Note
0/990
If you want to consult the bulk order, you can submit a inquiry or contact us .

Carbon Brushes 0.55x0.3x3.58 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 4 Pack

$5.40